Dodge Ram Pickup Rain Guards Installation And Review Videos

Putco Element In Channel Window Visors Installation - 2003 Dodge Ram Pickup- Video

Today on this 2003 Dodge Ram Pickup 1500 Series Quad Cab we're going to install part number P580102. This is the Putco Element In-Channel Window Visors. This is a four piece unit that'll do all four doors. This is what it looks like on the truck. We're looking at the passenger's side. You can see how it fits up underneath the track here on the top, and it sits in there by friction and it also has an adhesive patch that goes all the way around that sticks to the inside edge of the window sill here. more

1/26/2015 10:28:34 AM

Putco Element Tinted Window Visor Installation - 2011 Dodge Ram Pickup- Video

Today on our 2011 Dodge Ram pickup well be installing the Putco Element tinted window visors for both the front and rear in a four piece kit part #: P580139. To begin with well need to lower the window down. Next well need to pull the backing off of the two sided tape that already comes attached to the window visor. Next well begin here towards the front or near the mirror and well slide it into the window channel. With the window visor boat outward well put the back end of the window visor into the channel. Well then continue to pull downward on the window visor, sliding it into the window channel as we work across the window. more

11/13/2013 1:20:59 PM

Putco Window Visors Installation - 2012 Dodge Ram- Video

Today on our 2012 Dodge Quad cab Pickup well be installing the Putco element window channel visors, part number P580137. Starting here on the passenger side well go ahead and lower the window. We can go ahead and remove the adhesive cover. Starting next to the mirror down at the bottom near the window opening well put the visor into the window channel. Well go ahead and flex the visor so that we can get the opposite in into the window channel and then work the center into the window channel. Be advised that if the adhesive catches the window trim that youll need to go ahead and slide a flat bladed screwdriver or a trim panel tool in so that the window visor gets all the way up into the window channel. more

12/20/2012 1:14:23 PM

WeatherTech Window Visor Installation - 2009 Dodge Ram Pickup 1500- Video

We are going to be installing WeatherTech side window deflectors, part number WT80503. So, I am going to start by installing it here at the front, making sure that this piece is on the outside. We are going to the recessed areas and these are in channel visors. So we want the top sections, the thinned out portion, to go ahead and to sit inside the channel. And then with the front corner ed, we just actually want to go to t he rear section of the air deflector. When it is just sitting on top, it actually overlaps the door quite a bit. So what we are going to have to do is actually fold it down so that it can be ed into the channel. You can see there is quite a bit of flex in t he window visor. You want to make sure that you are not installing this in any weather that is under 50 degrees because that bending of the visor could actually crack the visor if it is not warm enough. 0:47 more

4/27/2010 3:47:08 PM